K-002: Window control/window won't roll down/window reset procedure

Old 12-11-2008, 11:40 PM
  #1  
Intermediate
Thread Starter
 
dubz ASPEC's Avatar
 
Join Date: Sep 2007
Age: 42
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
K-002: Window control/window won't roll down/window reset procedure

has anybody had problems with power windows not opening or closing smoothly? my drivers door sticking and cannot open or close properly via auto up mode. I checked the seal and nothing is out of place.
Old 12-15-2008, 07:11 AM
  #2  
9th Gear
 
JCareyB's Avatar
 
Join Date: Sep 2007
Age: 76
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Having same problem with raising front passenger side window. Dealer Saturday said it appeared to be binding some in the channel, which would make the "regulator" take it back down rather than breaking the glass. They said also might be a defective regulator. Both a replacement channel assembly and a replacement regulator are now on order, and they'll call us when they're ready to do the warranty install. I love my dealer!
Old 12-16-2008, 12:28 PM
  #3  
2nd Gear
 
drtuth's Avatar
 
Join Date: Dec 2008
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Does anyone know why my rear windows will go down from the door controls or the driver controls? The front passenger window works fine.
Old 12-16-2008, 12:40 PM
  #4  
2nd Gear
 
drtuth's Avatar
 
Join Date: Dec 2008
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Should read "will NOT go down.
Old 12-16-2008, 05:10 PM
  #5  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
^^^
This problem is different from the one noted in the OP. I've had this problem before. The car needs to be "rebooted". This entails a trip to the dealer, where a service person will connect your car to a computer and "safely" reboot the car. You can also disconnect the battery, then reattach it, but that is not ideal or preferred.
Old 12-19-2008, 07:43 PM
  #6  
Instructor
 
jfarabaugh's Avatar
 
Join Date: Nov 2008
Location: Malvern, PA
Age: 44
Posts: 186
Likes: 0
Received 10 Likes on 6 Posts
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls
The following 5 users liked this post by jfarabaugh:
hagialper (06-18-2014), jvoss (07-24-2011), RLCLAW (02-02-2017), skent520 (05-17-2022), Walfunk (05-04-2017)
Old 12-22-2008, 07:27 AM
  #7  
Instructor
 
Chulodee's Avatar
 
Join Date: Dec 2008
Location: Brooklyn
Age: 44
Posts: 120
Received 0 Likes on 0 Posts
Talking jfarabaugh Is The Man

I did just like you post and it saved me a trip to the long line on the dealership! Thanks.
Old 12-22-2008, 08:32 AM
  #8  
Three Wheelin'
 
dwest1023's Avatar
 
Join Date: Jul 2005
Location: DC
Age: 69
Posts: 1,852
Received 90 Likes on 75 Posts
Originally Posted by dubz ASPEC
has anybody had problems with power windows not opening or closing smoothly? my drivers door sticking and cannot open or close properly via auto up mode. I checked the seal and nothing is out of place.
Had this problem. The dealer just lubed the window seals and no problem since.
Old 12-22-2008, 09:09 PM
  #9  
Advanced
 
slainte_0317's Avatar
 
Join Date: Dec 2008
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
jfarabaugh Is The Man X2

Originally Posted by Chulodee
I did just like you post and it saved me a trip to the long line on the dealership! Thanks.
I love this forum! New RL owner, had the same problem, just saved a trip to the dealer. Thanks jfarabaugh!
Old 12-23-2008, 05:08 PM
  #10  
Pro
 
RL06tech's Avatar
 
Join Date: Jan 2007
Age: 59
Posts: 706
Received 26 Likes on 23 Posts
Originally Posted by jfarabaugh
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls
Yep, this is good info to keep as a sticky. I had problems with the windows when I had my battery issue last winter. The reset is necessary as part of the antipinch feature. This problem is germane to the RL since its the only honda that has auto up and down for all windows, I maybe mistaken but I had read the procedure elsewhere probably in the manual.
The following users liked this post:
frustration2023 (03-06-2023)
Old 01-01-2009, 09:11 PM
  #11  
6th Gear
 
clevendore's Avatar
 
Join Date: Jan 2007
Age: 74
Posts: 6
Likes: 0
Received 1 Like on 1 Post
Originally Posted by jfarabaugh
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls
I'm a little confused about this procedure. I just had my battery replaced and now the rear windows won't go down. The procedure indicates to "press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down". If the window won't go down in the first place how can you do this? I tried best I could but windows won't budge. What am I missing?
The following users liked this post:
frustration2023 (03-06-2023)
Old 01-07-2009, 02:28 PM
  #12  
jpj
7th Gear
 
jpj's Avatar
 
Join Date: Nov 2008
Age: 49
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
I had the same problem. What this fix is for is if you have a window that will not roll down with the drivers master window control but it will roll down with the single control at that door. You need to roll that window down and up in this sequence and then the master control will work. If you have a window that won't roll down with any of the switches you have another problem.
Old 01-07-2009, 07:53 PM
  #13  
Randy is the Future
 
nore03's Avatar
 
Join Date: Apr 2005
Location: Tampa, FL
Age: 38
Posts: 341
Received 44 Likes on 23 Posts
Originally Posted by jfarabaugh
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls

OMG you just saved me a trip to the dealer and a hundred bucks for a diagnostic fee. I have been dealing with this issue for like a week and a half i cant believe it was that easy. Damn there is a problem on this site you guys cant fix.
Old 01-19-2009, 08:10 PM
  #14  
8th Gear
 
martysh's Avatar
 
Join Date: Nov 2006
Posts: 8
Likes: 0
Received 1 Like on 1 Post
Red face Same Exact Problem, Why so many replaced Batteries?

Also saved me a trip to the dealer. Recently had battery replaced on 06 RL after 2 years and 2 months. Makes me wonder why so many batteries need to be replaced. Also needed to replace the battery in my key at about the same time. Wonder if there is a correlation.

I wonder about alot of things.
The following users liked this post:
frustration2023 (03-06-2023)
Old 01-20-2009, 07:54 AM
  #15  
Instructor
 
drolds72's Avatar
 
Join Date: Apr 2008
Location: Prior Lake, MN
Age: 54
Posts: 241
Received 27 Likes on 19 Posts
The window reset also allows the second push and hold of the keyfob unlock button to lower all windows and open sunroof, to start working again. Not that many would have noticed it not working this time of year!
The following users liked this post:
frustration2023 (03-06-2023)
Old 01-24-2009, 02:00 PM
  #16  
3rd Gear
 
LARAIDER's Avatar
 
Join Date: Dec 2008
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jfarabaugh
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls

It worked for my wifes 06 RL, thanks.
Old 03-01-2009, 06:12 PM
  #17  
EKG
5th Gear
 
EKG's Avatar
 
Join Date: Feb 2009
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Power Window Problems

I've had my CPO 2006 RL for about 2.5 weeks now, and already had the propeller shaft replaced. While driving today with the kids in the back, one of the rear windows was accidentally rolled down. When I tried to roll it up from the driver's side controls, no dice. Tried the other rear passenger window, also did not work. Tried the front passenger window and driver's window which both did work. Toggled the AUTO switch off/on a few times, tried again, and same thing.

When I got home, I turned the car off then back on, and then the left rear passenger window began to work, but still can't get the right rear passenger. All windows do work however if controlled by the dedicated switch for that window. I have also noticed that the function to roll the windows/moonroof down with the keyless remote does not work either.

Is there a simple solution to this that I am missing, or does this entail other visit to the service dept? Any help is always appreciated.
Old 03-01-2009, 07:12 PM
  #18  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
Easy fix.

Press and hold the button to roll each problem window all the way down, then hold for 5 seconds after the window is down. Let go of the button. Press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls.
The following users liked this post:
frustration2023 (03-06-2023)
Old 03-01-2009, 07:30 PM
  #19  
EKG
5th Gear
 
EKG's Avatar
 
Join Date: Feb 2009
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
I love this forum. An hour after my original post and problem is solved. Thanks so much Bob, your advice was spot on.

BTW, any idea what can cause something like that to happen?
Old 03-02-2009, 12:26 PM
  #20  
Instructor
 
foam4me's Avatar
 
Join Date: Apr 2008
Location: Maine
Age: 78
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
It's hard to control the electrons.

Seriously, even some stray EMF can derail flash memory so things need to be reset.
Old 04-08-2009, 04:56 PM
  #21  
Racer
 
poppintec's Avatar
 
Join Date: Jul 2008
Age: 36
Posts: 492
Likes: 0
Received 5 Likes on 4 Posts
window question

so all of my windows work perfectly except for the rear passenger, for some reason i can only put the window down from the back seat and the 1 touch feature does not work. I get no response from the front controls and wondering if there is any kind of stupid childproof thing that i can figure out, i doubt that is it, but wonder why it would work from the backseat and not the drivers seat.........thanks for any input
Old 04-08-2009, 05:03 PM
  #22  
037
Safety Car
 
037's Avatar
 
Join Date: May 2006
Location: NY
Posts: 4,258
Received 88 Likes on 79 Posts
There's a way to hold one of those window buttons down to reset everything...I'm sure someone will chime in shortly.
Old 04-08-2009, 05:55 PM
  #23  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
Easy fix.

Press and hold the button to roll each problem window all the way down, then hold for 5 seconds after the window is down. Let go of the button. Press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controlled from the drivers window controls.
Old 04-10-2009, 04:21 PM
  #24  
Racer
 
poppintec's Avatar
 
Join Date: Jul 2008
Age: 36
Posts: 492
Likes: 0
Received 5 Likes on 4 Posts
so i should be doing this from the backseat where the window does roll down or from the front, because it doesnt roll down from the front, but i am going to experiment.....by the way bob ur the man for the info thanks a lot
Old 04-10-2009, 04:48 PM
  #25  
Racer
 
poppintec's Avatar
 
Join Date: Jul 2008
Age: 36
Posts: 492
Likes: 0
Received 5 Likes on 4 Posts
well i figured it out..... bob and 037 much appreciation and glad to see on the RL forums i don't get told to search 463 times and people actually help........thanks again
Old 04-18-2009, 02:46 PM
  #26  
Cruisin'
 
spree-dakid's Avatar
 
Join Date: Jan 2008
Location: South Jersey
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by neuronbob
Easy fix.

Press and hold the button to roll each problem window all the way down, then hold for 5 seconds after the window is down. Let go of the button. Press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controlled from the drivers window controls.

Hey can you please help window fix? I'm having the a similar problem the driver side window goes up when I press the up button but stops at half way the passenger side goes all the way up with out no problems? If i hold the button it goes all the way up but if i just press up it goes up and stops then I have to hold down the up button for it to go all the way up.
Old 04-18-2009, 04:27 PM
  #27  
Safety Car
 
Chas2's Avatar
 
Join Date: Nov 2006
Location: Northern VA
Posts: 4,217
Received 38 Likes on 29 Posts
Originally Posted by spree-dakid
Hey can you please help window fix? I'm having the a similar problem the driver side window goes up when I press the up button but stops at half way the passenger side goes all the way up with out no problems? If i hold the button it goes all the way up but if i just press up it goes up and stops then I have to hold down the up button for it to go all the way up.
Did you try the reset procedure above?

If that does not work, dealer time to reset the window, although they would do the same thing first. All you are doing is reseting the limits on the windows since they have an auto down, auto up with auto reverse in case an arm or hand gets in the way...
Old 04-19-2009, 08:06 AM
  #28  
Instructor
 
drolds72's Avatar
 
Join Date: Apr 2008
Location: Prior Lake, MN
Age: 54
Posts: 241
Received 27 Likes on 19 Posts
don't forget to check the sunroof with the keyfob. If it does not open with the windows, you will need to reset it as well.
The following users liked this post:
frustration2023 (03-06-2023)
Old 04-19-2009, 09:02 PM
  #29  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
Originally Posted by Chas2
Did you try the reset procedure above?

If that does not work, dealer time to reset the window, although they would do the same thing first. All you are doing is reseting the limits on the windows since they have an auto down, auto up with auto reverse in case an arm or hand gets in the way...
Old 05-05-2009, 09:23 PM
  #30  
Advanced
 
pickncrew's Avatar
 
Join Date: Jan 2009
Location: Franklin, CT
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
I'll have to try the reset... just found out after 10k miles the rear windows don't work from the driver controls.
Old 05-22-2009, 04:38 PM
  #31  
Intermediate
 
CelestialRL05's Avatar
 
Join Date: Jan 2009
Age: 46
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Locked Windows? Help


I was cleaning my RL this morning and I noticed that I was NOT able to lower or raise the two rear windows from the driver side master windows control. Oddly enough i was able to control the front passenger side window without issue. I was not sure if I may have hit something to lock the controls? Or is this a fuse?
The other interesting note is that i was able to control the rear windows from the rear doors...
Any answers or suggestions is most appreciated.

thank you--
Old 05-22-2009, 04:43 PM
  #32  
037
Safety Car
 
037's Avatar
 
Join Date: May 2006
Location: NY
Posts: 4,258
Received 88 Likes on 79 Posts
do a reset...

something about holding down each window all the way up like 10 seconds then back...for each one.

Someone who can remember this, please chyme in as the past 3 attempts I couldn't remember the exact way of doing it.
Old 05-22-2009, 04:52 PM
  #33  
Safety Car
 
getakey's Avatar
 
Join Date: Sep 2005
Posts: 3,920
Received 420 Likes on 314 Posts
https://acurazine.com/forums/showthread.php?t=719975
Old 05-25-2009, 12:24 AM
  #34  
Racer
 
poppintec's Avatar
 
Join Date: Jul 2008
Age: 36
Posts: 492
Likes: 0
Received 5 Likes on 4 Posts
i had the same problem all you have to do is lower the windows completely and then roll them up and hold for 10 secs they should be fine after that
Old 05-26-2009, 10:06 PM
  #35  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
getakey quotes the thread with the answer.
Old 08-24-2009, 09:42 PM
  #36  
Racer
 
30CL's Avatar
 
Join Date: Feb 2001
Location: IL, USA
Posts: 364
Received 0 Likes on 0 Posts
Originally Posted by jfarabaugh
you can reset the windows yourself. press and hold the button to put the window the whole way down then hold for 5 seconds after the window is down. let go of the button. press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controled from the drivers window controls. I had to perform it just tonight to be able to control the passenger windows from my drivers door controls
Thanks. Found this thread in a search. Worked for me like a charm.
Old 08-25-2009, 10:23 PM
  #37  
Intermediate
 
ABboy's Avatar
 
Join Date: Jul 2009
Location: Alberta
Age: 49
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Rear window control

I'm having an issue with the rear driver side window. From the drivers controls I can't move it but from the rear control on the door, no problem? Anyone else?
Old 08-26-2009, 11:31 AM
  #38  
Senior Moderator
 
neuronbob's Avatar
 
Join Date: Nov 2001
Location: Cleveland area, OH
Posts: 20,015
Received 4,612 Likes on 2,193 Posts
Easy fix.

Press and hold the button to roll each problem window all the way down, then hold for 5 seconds after the window is down. Let go of the button. Press and hold the button to put the window the whole way up then hold for 5 seconds after the window is up. your windows should now be reset and can be controlled from the drivers window controls.
Old 08-26-2009, 11:54 AM
  #39  
Intermediate
 
ABboy's Avatar
 
Join Date: Jul 2009
Location: Alberta
Age: 49
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
your a god bob, thanks!
Old 08-26-2009, 01:38 PM
  #40  
Torch & Pitchfork Posse
 
TampaRLX-SH's Avatar
 
Join Date: Feb 2007
Location: Tampa, Florida
Age: 60
Posts: 4,729
Received 1,806 Likes on 793 Posts
*tosses a Scooby Snack*

Thread Tools
Search this Thread
Quick Reply: K-002: Window control/window won't roll down/window reset procedure



All times are GMT -5. The time now is 05:46 AM.